Our Services

---

* Drain and clean filter system.

* Blow out lines from filter, pumps, heater, and piping

* Antifreeze all lines

* Install return plug, if applicable

* Winterize heater

* Remove ladders and handrails

* Vacuum

* Add winter chemicals (liquid chlorine)

* Put on and secure winter cover using your water bags, straps, or springs. (Extra water bags available for an extra charge)

**Hot tub closing not included (extra charge $150)

* Drain and clean filter system.

* Blow out lines from filter, pumps, heater, and piping

* Antifreeze all lines

* Install return plug, if applicable

* Winterize heater

* Remove ladders and handrails

* Vacuum

* Add winter chemicals (liquid chlorine)

* Put on and secure winter cover using your water bags, straps, or springs. (Extra water bags available for an extra charge)

**Hot tub closing not included (extra charge $150)

* Drain and clean filter system.

* Blow out lines from filter, pumps, heater, and piping

* Antifreeze all lines

* Install return plug, if applicable

* Winterize heater

* Remove ladders and handrails

* Vacuum

* Add winter chemicals (liquid chlorine)

* Put on and secure winter cover using your water bags, straps, or springs. (Extra water bags available for an extra charge)

**Hot tub closing not included (extra charge $150)

* Drain and clean filter system.

* Blow out lines from filter, pumps, heater, and piping

* Antifreeze all lines

* Install return plug, if applicable

* Winterize heater

* Remove ladders and handrails

* Vacuum

* Add winter chemicals (liquid chlorine)

* Put on and secure winter cover using your water bags, straps, or springs. (Extra water bags available for an extra charge)

**Hot tub closing not included (extra charge $150)

* Vacuum

* Drain water level down below return

* Prepare skimmer

* Add winter chemicals

* Drain and clean filter

* Take out ladder

* Put on and secure winter cover using your equipment

1. Cover Removal: Technician drains and folds the pool cover.
2. Winter Gear Removal: All winterizing items (plugs, covers) are taken out.
3. Equipment Setup: Pump and filter are reassembled and prepped.
4. Ladder/Stairs: Reinstalled if applicable.
5. System Start-Up: Equipment is turned on; diagnostics may follow if issues arise.
6. Heater Check: Heater is tested; further inspection if it fails to ignite.
7. Initial Cleaning: Pool walls brushed and vacuumed once
8. Chemical Treatment: Shock added to balance water quality

Drain pool

Remove old liner

Make any necessary small repairs to bottom and sides

Install new liner

Install all caps and covers

Cut holes

Fill with customers water

Drain pool

Remove old liner

Make any necessary small repairs to bottom and sides

Install new liner

Install all caps and covers

Cut holes

Fill with customers water

*Pool must be drained down to 1-2 feet. Extra charges may apply if the water level is above 2 feet.

* Drain and clean filter system.

* Blow out lines from filter, pumps, heater, and piping

* Antifreeze all lines

* Install return plug, if applicable

* Winterize heater

* Remove ladders and handrails

* Vacuum

* Add winter chemicals (liquid chlorine)

* Put on and secure winter cover using your water bags, straps, or springs. (Extra water bags available for an extra charge)

**Hot tub closing not included (extra charge $150)

* Drain and clean filter system.

* Blow out lines from filter, pumps, heater, and piping

* Antifreeze all lines

* Install return plug, if applicable

* Winterize heater

* Remove ladders and handrails

* Vacuum

* Add winter chemicals (liquid chlorine)

* Put on and secure winter cover using your water bags, straps, or springs. (Extra water bags available for an extra charge)

**Hot tub closing not included (extra charge $150)

* Vacuum

* Drain water level down below return

* Prepare skimmer

* Add winter chemicals

* Drain and clean filter

* Take out ladder

* Put on and secure winter cover using your equipment

1. Cover Removal: Technician drains and folds the pool cover.
2. Winter Gear Removal: All winterizing items (plugs, covers) are taken out.
3. Equipment Setup: Pump and filter are reassembled and prepped.
4. Ladder/Stairs: Reinstalled if applicable.
5. System Start-Up: Equipment is turned on; diagnostics may follow if issues arise.
6. Heater Check: Heater is tested; further inspection if it fails to ignite.
7. Initial Cleaning: Pool walls brushed and vacuumed once
8. Chemical Treatment: Shock added to balance water quality

Drain pool

Remove old liner

Make any necessary small repairs to bottom and sides

Install new liner

Install all caps and covers

Cut holes

Fill with customers water

Drain pool

Remove old liner

Make any necessary small repairs to bottom and sides

Install new liner

Install all caps and covers

Cut holes

Fill with customers water

*Pool must be drained down to 1-2 feet. Extra charges may apply if the water level is above 2 feet.

Add a description about this item

Add a description about this item

Add a description about this item